LOGO_MJ_FOOTER
Return to the list of mechanisms
Technical data:

Technical data:

1. Seat depth adjustment in range of 77 mm
2. Tension adjustment by side handwheel
3. Locking in 4 position
4. Antishock
5. Seat inclination 8°, backrest inclination 20°
 
Seat height adjustment by means of the right lever

Seat height adjustment by means of the right lever

To raise the seat, get up from the chair, raise the right lever upwards and the seat will begin to raise, then release the lever to lock the seat at the desired height.
 
To lower the seat, the right lever should be raised in the sitting position, the seat will begain the lower, than release the lewer to lock the seat at the desired height.
Synchronized adjusttmen of the tilt angle of the backrest and seat by means of the left lever – the ability to swing freely, the possibility of locking in many positions

Synchronized adjusttmen of the tilt angle of the backrest and seat by means of the left lever – the ability to swing freely, the possibility of locking in many positions

Activate the mechanism by lifting the left lever upwards. With the mechanism released, the back pressure should be applied to the backrest to achieve the desired angle of backrest and seat. Then turn the lever down to lock the mechanism and set the chair in a certain position. If the mechanism is not blocked on the chair, you can rock freely.

 

An additional Anti-Schock system prevents the backrest from hitting a sitting person. To unlock the Anti-Shock system, press the back with your back and then lean forward.

Adjusting the intensity with the handwheel – adjustable backrest and seat tilt resistance (3-step adjustment)

Adjusting the intensity with the handwheel – adjustable backrest and seat tilt resistance (3-step adjustment)

Turning the handwheel backwards, the resistance of the backrest and the seat decrease, adapting the chair to people with lower body weight.

Turning the handwheel forward increase the resistance of the backrest and seat, adapting the chair to people with higher body weight.

Backrest height adjustment (depending on the chair model)

Backrest height adjustment (depending on the chair model)

Up & Down system - the backrest high is adjusted by pulling the backrest up to the required height. The backrest should stop at the appropriate latch, to lower if the backrest should be pulled all the way up and the lowered down.

Adjustmend by means of a button.

Backrest heigh is adjusted by pressing the right button on the backrest with simultaneous pulling or lowering the backrest to the required height and releasing the button.

Seat slider adjusts the seat depth using the lever

Seat slider adjusts the seat depth using the lever

Pull the left lever upwards under the seat with the backrest mechanism locked. Hold the lever and move the seat to the desired position. Then release the lever. The seat will lock in its current position.