LOGO_MJ_FOOTER
Return to the list of mechanisms
Technical data:

Technical data:

  1. Separate adjustment of backrest and seat inclination by two levers, backrest inclination 14°
  2. Height adjustment of backrest locking by handwheel
  3. Height adjustment of the seat by lever
  4. Locking in many positions
  5. Mechanism can be used in locked position only
Seat height adjustment by front right lever

Seat height adjustment by front right lever

To raise the seat, get up from the chair, raise the right lever upwards, the seat will begin to raise, then release the lever to lock the seat at the desired height.
 

In order to lower the seat, the right lever should be raised in the sitting position, the seat will begin to lower, then release the lever to lock the seat at the desired height.

Synchronized adjustment of the tilt angle of the backrest and seat by means of the left lever – the ability to swing freely, the possibility of locking in many positions

Synchronized adjustment of the tilt angle of the backrest and seat by means of the left lever – the ability to swing freely, the possibility of locking in many positions

Activate the mechanism by lifting the left lever upwards. With the mechanism released, the back pressure should be applied to the backrest to achieve the desired angle of backrest and seat. Then lower the lever down to lock the mechanism and set the chair in a certain position. If the mechanism is not blocked on the chair, you can rock freely.


 
Adjusting the angle of the backrest by rear right lever

Adjusting the angle of the backrest by rear right lever

Activate the mechanism by lifting the rear right lever upwards. When the mechanism is released, apply pressure to the back with your back to achieve the desired angle of tilt. Then lower the lever down to lock the mechanism and set the chair in a certain position.

Adjusting the height of the backrest by locking the handwheel

Adjusting the height of the backrest by locking the handwheel

The backrest height is adjusted by unscrewing the knob (right or left depending on the model) backwards, then pull or lower the backrest to the required height and tighten the knob again.

Seat slider adjusts the seat depth with a lock in 5 positions using the lever

Seat slider adjusts the seat depth with a lock in 5 positions using the lever

Pull the lever upwards under the seat with the backrest mechanism locked. Hold the lever and move the seat to the desired position. Then release the lever. The seat will lock in its current position.


 
Seat slider

Seat slider

Technical data:

1. Locking in 5 positions

2. Seat depth adjustment in range of 50 mm