LOGO_MJ_FOOTER
Return to the list of mechanisms
Technical data:

Technical data:

1. Synchronized adjustment of the backrest and seat tilt angel by one lever

2. Two levers

3. Tension adjustment by bottom handwheel

4. Locking in many positions

5.  Mechanism can be used in locked position only

6.  Seat inclination -3°/+10° , backrest inclination -10°/+15°

7. Automatic height adjustment of the backrest

 

Seat height adjustment by the right lever

Seat height adjustment by the right lever

To raise the seat, get up from the chair, raise the right lever upwards, the seat will slowly rise, then release the lever to lock the seat at the desired height.
 

In order to lower the seat, the right lever should be raised in the sitting position, the seat will slowly lower, then release the lever to lock the seat at the desired height.

 

Synchronized adjustment of the backrest and seat tilt angle with one lever – the ability to swing freely, the possibility of locking in many positions

Synchronized adjustment of the backrest and seat tilt angle with one lever – the ability to swing freely, the possibility of locking in many positions

Activate the mechanism by lifting the rear right lever upwards. With the mechanism released, the back pressure should be applied to the backrest to achieve the desired angle of backrest and seat. Then lower the lever down to lock the mechanism and set the chair in a certain position. If the mechanism is not blocked on the chair, you can rock freely.


 
Adjusting the intensity with the handwheel – adjustable backrest tilt resistance

Adjusting the intensity with the handwheel – adjustable backrest tilt resistance

Unscrewing the knob to the left decreases the backrest resistance force, thus adapting the chair to people with lower body weight.
 

By turning the knob to the right, the backrest resistance increases, adapting the chair to people with higher body weight.

 

 

Backrest height adjustment (epending on the chair model)

Backrest height adjustment (epending on the chair model)

System up & down – the backrest height is adjusted by pulling the backrest up to the required height. The backrest should stop at the appropriate latch, to lower it the backrest should be pulled all the way up and then lowered down.
 

Adjustment by means of a button – the backrest height is adjusted by pressing the right button on the backrest with simultaneous pulling or lowering the backrest to the required height.


 
Seat slider adjusts the seat depth with a lock in 5 positions using the lever

Seat slider adjusts the seat depth with a lock in 5 positions using the lever

Pull the lever upwards under the seat with the backrest mechanism locked. Hold the lever and move the seat to the desired position. Then release the lever. The seat will lock in its current position.


 
Seat slider

Seat slider

Technical data:

1. Locking in 5 positions

2. Seat depth adjustment in range of 50 mm